plate_loc image_id id All This state parameter is not normally modified with the 'set' command. The firmware uses this parameter for internal 'housekeeping'. The image id code of the image using the plate in this location. This id code will match the id code of the image command sent from the workstation. Do not modify. integer

0

0 to 15

state

..\..\ShowAllErrors.htmFirmware 0 Error Index

..\..\ShowAllCommands.htmFirmware 0 Command Index

..\..\ShowAllNVS.htmFirmware 0 NVS Index

Updated: Wed Jul 16 19:37:21 2008 PST